Muen
News

News

Enterprise service provider

location : Home > News > Technical information

How does vector control of frequency converter improve the ability of electromechanical output torque?

2023-05-20 13:37:24

Not all frequency converters have vector control.


With vector control inverter, the general meaning of motor control is: imitating the speed regulation characteristics of DC motor, the speed of three-phase asynchronous AC motor is adjusted by controlling its two vertical DC magnetic fields.


The following is a block diagram of inverter and motor vector control that I share with you.


For the motor using vector control, it can be divided into two types: non feedback vector control (SVC) and feedback vector control (FVC). No vector control (SVC): because of the speed feedback, it is very troublesome to install additional device of encoder in the motor driven by frequency converter. In this paper, through research, the technical engineers of frequency converter design can calculate the magnetic flux and angular velocity of the motor rotor even if they only need to detect the terminal voltage and working current of the motor, and then calculate the required torque current signal instruction it * and excitation current signal instruction im *, so as to realize the no feedback signal The purpose of vector control.


Then, (FVC) has a feedback vector control, its shaft is installed with an encoder, the encoder will motor speed at any time and anywhere after the detection, sent to the control circuit signal input. Compared with the vector control with feedback, the mechanical torque characteristics of non feedback vector control is much better. So the torque dynamic response ability of the inverter with feedback vector control is worse.


1) As can be seen from the above block diagram, for the frequency converter, given signal processing, in the control circuit, the given signal is simulated and decomposed into two mutually perpendicular DC magnetic field signals. They are called component it * and torque component im *, respectively.


2) According to the technical parameters of the three-phase AC asynchronous motor, a series of equivalent transformations are carried out on the vertical rotating DC magnetic field signals, which are regarded as the control signals ia *, IB *, IC * for controlling the three-phase inverter. When the given signal is changed, the torque component of the DC magnetic field is adjusted to obtain the speed regulation characteristics similar to that of the DC motor.


Frequency converter manufacturer


label

QR code

The public,

Mobile station
The public, Mobile station

Contact

未標題-8.png 0755-81719517
未標題-10.png0755-81719530 未標題-11.pngamb@ambition.com.cn
未標題-12.pngFloor 1, 5 and 6, building 7, lijincheng science and technology industrial park, gongye dong road, longhua new district, shenzhen

Navigation

Home          About

Product      Case

Solution      Service

Job      News

Contact          

Copyright © Shenzhen Ambition Electronic Co., Ltd Record number:備案號:粵ICP備12045920號